https://gopayforit.com/wp-login.php?action=logout&_wpnonce=1596397f4a

This product resolved the disappointment I had in using the square reader. The first time I charged my square chip reader, it lasted for about 5 or 6 customer transactions. Every time I re-charged the chip reader sometimes I got one transaction, sometimes two before it showed that it was out of battery again. I was going to give-up using the square chip reader until I purchased the charging dock for the chip reader. Now I just leave it in the dock and have not had one transaction rejected as a result of low battery.
The best part about this package is that each one comes with both a regular card swiper and a chip reader square. This is great since so many cards are now going to chip but you still need a swiper for regular cards.
All Electronics Deals Best Sellers TV & Video Audio & Home Theater Computers Camera & Photo Wearable Technology Car Electronics & GPS Portable Audio Cell Phones Office Electronics Musical Instruments New Arrivals Trade-In
As a bluetooth only device, it is a bit glitchy. If you are wanting to use it with a phone/tablet only as a standalone device, look elsewhere. The miura m010 reader works great for this, though is unfortunately not available on amazon.
Wall Mountable   Need more counter space? Create more room by mounting the printer to the wall. The futurePRNT Configuration Utility allows for Text Reversal so the receipt is printed to face the user.
If I am at a venue where I have no power access, I still use the dock/charging station because it positions the reader for easy use. I do not put the locking piece on the top of the dock, because I do have to take the reader out & wake it up if it goes too long between uses. The on/off button on the reader is on the bottom; it is covered and unreachable when it is in the dock. That is a bit inconvenient, but if it prolong the battery life I am ok with it. Leaving the locking end off makes the reader easy to remove when necessary.
The TSP100ECO, the world’s first ECO POS receipt printer, suppoers Star’s commitment to being ecologically responsible, while allowing Star to continue to provide a high-speed, software enriched economical choise for users. The TSP100ECO has been designed with an advanced power management circuitry which allows any user to reduce their printer’s current consumption by up to 75% compared to standard Star printers, making it the most economic printer in its class. Learn more about the TSP100ECO here.
The Square Contactless and chip reader is a great product for those who run businesses and need something quick and easy to charge their clients with. The experience is super smooth and easy, works 100% of the time and takes up just about a few inches of space. I like the fact that it`s easy to use and visually appealing rather than those old credit card processing machines. I have enjoyed using this product and I will continue to do so until something better happens to be invented. The only gripe I have about this product is the fact they they charge you a percentage of your overall total sale price as a fee. I should also mention that I received a free sample of the Square product in exchange for my honest review.
Features of the CD3 include a black or white stainless steel front drawer cover with dual media slots and a three function lock system. The smooth black or white coated finish provides a unified appearance and complements the connected POS peripherals. The dual media slots provide extra storage for checks and large bills. For added security, the key lock at front center allows for an easy manual release via key or electronic release. Having a standard printer communication interface and bottom exit cable, hidden from the customer’s view the CD3 will serve any point of sale set up. These tradition cash drawers can accommodate both Canadian and US currency types of 3 Bill-5 Coin, or 4 Bill-5 Coin set ups.
This newsletter may contain advertising, deals, or affiliate links. Subscribing to a newsletter indicates your consent to our Terms of Use and Privacy Policy. You may unsubscribe from the newsletters at any time.
Star Micronics is proud to introduce the newest addition to the TSP100III series, the faster, easier, and better TSP100IIIU printer. As the first of its kind, the TSP100IIIU only requires one lightnin…
That sounds strange—the Contactless and Chip Reader won’t be able to pair with your mobile device without a strong Wifi or data connection. In addition, you should have received an error message within the app if the payment wasn’t successful. 😕
A perfect match for Square Credit Card Processing. The printer arrived as described. Easy setup and user friendly. Printer has a metal case is very heavy duty. One can add a logo to the customer receipts. Arrived as described and within the stated delivery time.
Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple’s Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
I am still trying my best to use it. My POS system doesn’t support Star. and now I am having the common problem that I am dealing with Star tech support, they are still working on it to solve the problem, which is it doesn’t print out All Receipts bar-codes on my machine even from their own configuration utility, can’t use Receipt Flip, it doesn’t cut off the receipt automatically, doesn’t print out my full store name in every other receipt, and sometimes the receipt goes out 2 feet long.
The Square Contactless + Chip Card Reader empowers businesses to accept two of the newest mobile credit card reader technologies: EMV and NFC. EMV is a new security standard designed to make transactions less risky for consumers. If you’ve recently received a new credit or debit card, it probably has an embedded, visible EMV chip. Instead of swiping EMV cards to make a payment, customers insert their card chip-first into the reader’s slot. The reader then quickly recognizes the card and processes the payment. NFC technology, by comparison, lets customers simply wave their phones over the reader to make a payment. 
Star TSP100II Printer (USB Port / AutoCutter / Dark Gray). This printer has a receipt paper AutoCutter built in, this is the Newer Eco Model of the Star Micronics TSP100. Each of our printers has been…
TSP143U GRY. Introducing the TSP143U GRY, the first all-in-one receipt printer. Yes, all the parts and software are included in one box. To get you setup quickly, we’ve included an internal power supply, interface cable, power cable, complete mounting kits and a paper roll. To bring you the future of receipt printing now, we’re also including a full set of software utilities. Redesign your receipt without modifying your application. Add your logo. Add coupons. Preview receipts and enhance bar codes. Included operating system drivers allow for ‘Plug and Play’ automatic installation. But setup is not the only fast part. The TSP143U GRY is a fast printer. It’s the All-In-One-Box Miracle coupling amazing features and high reliability at an affordable price.
If you use ‘Square’ as your credit card acceptance service, the Square Stand takes you to the next level of professionalism. It is especially useful for your store location, or if you set up a kiosk for the day at a local event. The device itself is quite heavy in order to keep the unit stable while you use it and when the client signs it.
Star Micronics is an established supplier of small printers, audio components, high-precision machine tools, and precision parts with years of proven product development and manufacturing expertise. Headquartered in Japan, the company has broadly expanded to establish offices and manufacturing facilities across the Americas, Europe, Asia, and Australia in it-related technologies and the manufacturing and assembly of miniature high-precision devices.
Drivers Available   Windows 10, Windows 8.1, Windows® XP 32 Bit, Vista 32/64 Bit, Windows 7 32/64 Bit, Server 2008 32/64 Bit, XP Embedded, POSReady2009, OPOS™, JavaPOS™, USB Vendor Clss, CUPS, Mac, Mac OS X, Linux™, StarPRNT SDK with support for iOS and Android
The Star CD3-1616 Tradition cash drawer includes a durable ABS plastic cash till with 5 bill and 8 coin slots that provides the storage capacity needed for high cash volume with the connectivity options necessary in any sales environment.
The Kitchen Buzzer is designed to connect directly the the RJ11 port on the back of the printer. When a print job is sent to the TSP100, the buzzer will sound off. This is beneficial for high noise environmentslike kitchens to alert cooks that orders have been sent to them.
Printer is in perfect working condition and looks great. 22 rolls of printer paper are also included with purchase. Power cord , USB cord, and Ethernet cord also included. Don’t hesitate to ask questi…
I bought this for my office. I’m in private practice for speech language therapy. Some parents want to pay with Apple Pay and everyone else has a chip. The cord is plenty long. I keep the reader in the holder, but I didn’t keep the protective strip at the end. The reader is secure without the strip and with Apple making constant updates, you need to be able to pull the reader out to reset it occasionally. I still have the swiper that attached to my iPhone 7 Plus – I added an adapter to make it work, but this dock is my favorite. Great buy and great for my business.
The Dock for Square Reader is the perfect countertop partner for your new Square Reader + Apple Pay and Chip Cards. It keeps the reader charged and in place for quick, seamless transactions. You can also plug it into a Square Stand for instant setup and charging, or connect it wirelessly to your compatible iPhone or iPad with Bluetooth LE.
For lower to moderate cash drawer use, the CD3-1313 is an ideal choice. High volume cash handlers would benefit from the full size CD3-1616 drawer for easy organization of currency. Optimal in any POS environment, the CD3 Tradition cash drawers will enhance not only cash operations, but also appearance of your POS terminal.
I’ve only had it up and running for a couple of weeks now, but it prints and cuts the receipts well and have yet to have any problems with it. Drivers disc makes setting up and installing a snap, and it comes with any/all necessary cables. It even comes with a mount for wall mounting, but in looking at it I’m not sure how you would do that or even why someone might want to 🙂
Generally customers don’t mind the extra charge because of the convenience of not wasting time in going to an ATM. And if they use credit card, at least 1% returns to them, so it will be more of 1.75% charge. Pretty small for products under $25.
Welcome to Amazon.com. If you prefer a simplified shopping experience, try the mobile web version of Amazon at www.amazon.com/access. The mobile web version is similar to the mobile app. Stay on Amazon.com for access to all the features of the main Amazon website.
Everything worked exactly as it should, straight out of the box without any problems! It was easy to setup using the StarMicronics LAN & Bluetooth Setup Tool as well as the Configuration Utility TSP100. Once I configured my connection and established my IP address for the printer it was ready to use. Took about 10 – 15 minutes to setup everything. Definitely recommend for anyone wanting a receipt printer over IP.
Here are more sites to learn about this.

The keys are deceptive. I was thinking that it would open with keys and with the receipt printer. But the keys are for ornament only. It only opens manually with a little switch underneath, which is useless since I have a monitor sitting on top of the register, which means I cant manually open the register if my POS system does not allow for manual opening.

[redirect url=’https://gopayforit.com/bump’ sec=”]