https://gopayforit.com/wp-login.php?action=logout&_wpnonce=1596397f4a

Star TSP100 Thermal POS Receipt Printer with Autocutter, USB Port. The 22 rpm printing speed provided by this model makes it easy to complete any printing jobs with efficiency. In addition, it is capa…
To use it, open the app (Abbreviated as “Register” in the apps menu), You enter the amount and you can have the chip reader or the swipe card thingy be used for the transaction. The app will automatically detect when it happens. Then customer signs on the smartphone. enters email for receipt (or skips). And done, in 3 days or less you got your deposit ready for withdrawal. Customers already familiar with it, make transactions faster than cash, and I’ve notice sales have gone up, despite the 2.75% current charge (as of 11/01/16).
Epson has reinvented the kitchen printer with its innovative and efficient system that brings its customers easy, flexible and scalable KDS controller solutions available to fit any quick service businesses.
Compare the quality of the printed test page with the sample shown below. If there are no print quality problems, the printer itself is fine and the problem probably lies with the printer software settings, the application settings, the interface cable (be sure to use a shielded cable), or the computer itself.
Printer Output Built specifically to work in environments where heat and humidity can erode the type on the kitchen order, the SP700 is an ideal solution. This fast, two-color printer offers crisp, easy to read type for quick viewing, clamshell design for easy paper loading and an embedded power supply for space efficiency.
The link to the printer posted previously is correct, assuming you are running your Square system on a LAN (local area network) and will be using an Ethernet printer. If you are using a Square Stand, then you will need a USB cable and a really long USB cable. I’ve purchased the printer for less with knowledgeable help here.
Multiple interfaces: USB+SERIAL+LAN, WIFI, BLUETOOTH.This Printer Easy to Operate, and Has High Practicability . Especially Printer With Bluetooth Support Both Android and IOS Apple Device at The Same Time. We Offer USB Cable, But DO NOT Offer Serial Cable & LAN Cable
Unfortunately, I found this out after the 30 day return policy on my purchase has passed. Also unfortunately, this seller (despite being very polite) was firm in refusing to let me exchange my purchase for a cash drawer I could actually use.
Obtain a replacement black (T0321), cyan (T0422), magenta (T0423), or yellow (T0424) ink cartridge. To determine which cartridge is nearly empty, check the ink level using EPSON Status Monitor 3 (Windows) or EPSON StatusMonitor (Macintosh).
Super fast shipping, and great product! There is a glitch with the TSP100LAN and older printers that I want to mention. After talking for days with Star’s support, we figured out that on some models, they “time out” and stop looking for LAN after 20 seconds, but the power pack takes 30 to start up. Therefore, when you turn them both on at the same time (because they are using the same power source) the printer stops looking for the power pack before it has fully started. So all you have to do is set up as the instructions say, then (remember at this point you are on separate power) switch off the printer and back on and watch it connect like it should. Then simply shut down both devices and re-wire as the original instructions. Strangely enough, unless you reset the power pack, it works fine now even if you turn off the device and it is powered by the printer. My only guess is somehow the printer remembers the link and re-connects? Anyways, a little tricky, but works great! Much better than the bluetooth ones and twice the range at least! I have two hooked up on my food truck, both wireless to a hotspot. One is a kitchen printer with buzzer and the other is the main printer connected to ipad mini running square and running a cash drawer. Oh, and even though they state in the manual that you cannot run another device off this dk jack, you definitely can (I run the buzzer off the kitchen printer). Good luck to all!
I’ve only had it up and running for a couple of weeks now, but it prints and cuts the receipts well and have yet to have any problems with it. Drivers disc makes setting up and installing a snap, and it comes with any/all necessary cables. It even comes with a mount for wall mounting, but in looking at it I’m not sure how you would do that or even why someone might want to 🙂
The Touch Dynamic PR-IM Impact Receipt Printer is primarily a kitchen receipt printer and offers two-color, high quality graphics printing. Spill and heat resistant, it is built to withstand the toughest of environments. With a swappable interface, it provides effortless, customer installation, eliminating the headaches and stress that usually come with installing new technology. Additionally, this kitchen receipt printer boasts Epson compatibility and reliability, is wall-mountable and offers an external buzzer option for use in commercial kitchens, alerting kitchen staff when an order comes through.
The “E” and “L” models are the same thing Star Micronics just switched from using “LAN” to using “Ethernet” as their preferred description for the interface. The gray model is available with the new E designation the putty colored model still uses the L.
Absolute junk. Don’t waste your time. Even with static IP addresses across the network this device would still cause conflicts. It worked all of two times, and the second time it worked the router had to be power cycled in order for that miracle to occur. Disconnected it, put it away for a year, now I can’t even connect to the device to reconfigure it. Useless. Why they didn’t just use a simple wireless LAN adapter like the Netgear WNCE2001 is beyond me.
The information that you need to diagnose and solve most common problems is provided by the printer’s control panel, the EPSON Status Monitor utility, or by running a printer operation check. Refer to the appropriate section below.
If you have a Square Stand, in addition to the printers above, you can use certain USB interface receipt printers. The following receipt printers are only compatible with the Square Stand, not the Square card reader:
Printer with Parallel Interface. Right-side-up printing for kitchen orders. Two-color black and red receipt and order printing. NOTE: The # 1 issue is ordering printers with the wrong connection or in…
Product was better than I expected. I needed to place this printer quite a bit away from my POS system so I was looking for a good reliable WiFi printer that could do the job without having to wire the computer and printer together. Setup is not that hard, they provided a manual to set it up various different ways (Ethernet, parallel, Bluetooth, WiFi, etc) and if you’re patient enough, you can set it up on your own. It took me about 1 hour to finish. Definitely worth it.
Here are more sites to learn about this.

The SP700 is designed to make installation, utilization and maintencance as easy as possible for any user. The SP700 is ready to be used right “out-of-the-box”. A CD with WHQL XP®, 2K®, Vista® drivers, Linux and Mac® OSX drivers and documentation is included with the printer, making it ready for operation immediately after purchase.
Meet your new reader’s count ER top Partner: the dock for Square Reader. Designed for the Square contact less and chip Reader, the dock keeps the Reader charged and in place for quick, seamless transactions. Simply plug it into Square stand for instant setup and charging. Do you sell with Square Reader instead of Square stand connect the dock to a USB wall charger to keep your Reader powered all day long.
To send an order to the kitchen waiters tap a button. That’s all it takes to send each dish immediately to the kitchen where it is prepared and to print out a receipt automatically. All special requests for degree or order of preparation are sent as well.
Star Micronics TSP100GT Fast, reliable thermal printing is a snap with the Star Micronics TSP100GT. This printer offers additional configuraiton, including embedded graphics and logos, adding flair to retail receipts. The TSP100GT supports iPhones as well, giving you an option for receipt printing with your mobile POS installation.
The power cord cleverly mounts flush under the base and faces either right or left, depending upon your choice. It stays in place as the base rotates. The charger keeps the iPad trickle charged to 100 percent and also acts as the main power source when plugged in, saving your battery.
APG’s Stratis tablet holder is designed for mobile and tablet point of sale applications. The Stratis enables an iPad to seamlessly slide over to the customer facing side for signature approvals, while giving the cashier a firm base to work from during the transaction process. A magnetic connection between the Stratis holder and a cash drawer holds the tablet firmly in place. Available in black or white.     $125.95 Black
If no text is printed then test has failed. Double check the port settings using the self test, check the cable is correct and correctly connected, check that the Epson port service and Windows print spooler is turned off (if running) and check that you have attached the printer through the correct connector on the computer. If serial, parallel or USB, check that the port you are connecting to is also shown in the Windows Device Manager. If using an Ethernet or wireless connection check that the IP address of the printer is in the subnet of the computer you are running.
Using only Epson-tested media is critical to prolonging the life of the printhead in your Epson thermal printer. Other media has been known to damage the printhead over time and damage from use of untested media is not covered under warranty.
Set up is pretty much straightforward. You download the app (Squre Register-POS), you’ll need your Business Account // Personal Account along with routing number. Zip Code, name, address, social security and what not. Pretty much what a bank would ask you. Once your account is linked, it will ask you if you want them to send you their product or if you already got it. I thought the product was going to be sent for free, but it was charging me another $50, so i wanted to cancel and it didn’t give me that option. I still have to check with customer service about that. In the meanwhile i just put “charge me later” or something along the lines.
Square’s hardware is only approved for use in the country for which it is intended. For example, hardware sold or intended for sale in the United States is not approved for use in Australia, Canada, Japan, or the United Kingdom
In addition, the TM-U220 printers have been designed to be 100% compatible with existing systems that currently use a TM-U200 printer. They also have an adjustable paper width feature that allows you …

[redirect url=’https://gopayforit.com/bump’ sec=”]