Have used these at a lot of Arts & Crafts fairs. They work absolutely great! Even on shows with a few hundred other merchants nearby I have never had to wait more than a few seconds to get a good connection, which is a far cry from the several minute waits I often had to wait with terminals that relied on local wifi networks. In every case Square One transferred my money to my account by the next working day morning, gotta like that! Battery life is excellent, good for at least 40 cards between charges, but do be certain to keep a USB charger in your kit!
Buy Used and Save: Buy a Used “Star TSP100 TSP143U , USB, Receipt Printer – Not e…” and save 44% off the $279.99 list price. Buy with confidence as the condition of this item and its timely delivery are guaranteed under the “Amazon A-to-z Guarantee”. See all Used offers.
Install the printer software provided with your printer. If no software was provided with your printer, see our printer driver page for a listing of printer drivers. Drivers are required for your printer to properly work with the Windows operating system.
If the Ping Test fails then double check the local IP address of the computer as well as the IP address of the printer. Certain firewalls can block the connection. The printer could also have the ping reply disabled (see Network card settings).
When you purchase ShippingPass you don’t have to worry about minimum order requirements or shipping distance. No matter how small the order or how far it needs to go, ShippingPass provides unlimited nationwide shipping. If you need to return or exchange an item you can send it back at no cost or take it to your neighborhood store.
Use the specially designed Vertical Stand when utilizing the TSP100 in a vertical orientation. The Vertical Stand provides a clean surface facing the customer, which also creates room for advertising.
No more running orders to the kitchen or calling out orders to the barista. With just a tap of the finger and your handy iPad POS system, your orders can magically hop from the front of the house to a kitchen printer. Sounds great, right? Well that is until you realize that you don’t know what the heck a kitchen printer is and/or how to get one set up at your business.
You must use the correct printer cable to connect the printer to the computer. If printer passes self test, the settings are correct and verified, then check to see the cable is correct. More on connecting a parallel interface.
Introducing the TSP100 future PRNT, the first all-in-one receipt printer. Yes, all the parts and software are included in one box. To get you setup quickly, we’ve included an internal power supply, interface cable, power cable, complete mounting kits and a paper roll. To bring you the future of receipt printing now, we’re also including a full set of software utilities. Redesign your receipt without modifying your application. Add your logo. Add coupons. Preview receipts and enhance bar codes. Included operating system drivers allow for Plug and Play automatic installation.
The iPad app has additional customization settings that I didn’t notice on the phone app. The larger screen makes setting up your account and using the service much more user friendly. And if you decide you want to pull the iPad out and use it as a portable device, you can do that too.
Zebra offers an extended warranty on your product. Whether your Zebra Printer falls under the covered warranty time period or not, you can easily check that. All you have to do is connect with our Zebra Support and we will check that on your behalf.
Print a test page by clicking the icon with the right mouse button, then click the properties option and click print test page. If the test page does not print download the latest drivers from your printer manufacturer. A listing of printer drivers can be found on our printer drivers page.
If you have a specific problem relating to print quality, a printout problem not related to print quality, or a paper feeding problem, or if the printer does not print at all, refer to the appropriate section in this chapter.
The Square stand is very durable and to my surprise heavier than it looks. The swivel mount is built into the bottom of the device and conceals the power cord. This cord is connected to a 3 port USB module that will allow users to connect up to three separate POS devices in addition to connections with wireless LAN POS devices like receipt and label printers. Although not official, the Square stand can hold an iPad Air 2 pretty perfectly. I would suggest placing a small foam dot or so, just so that it is seamless to the stands edges. All in all, this is a great start-up POS system and highly customizable to any operation. I would recommend this product to any small business.
The Dock for Square Reader is the perfect countertop partner for your new Square Reader + Apple Pay and Chip Cards. It keeps the reader charged and in place for quick, seamless transactions. You can also plug it into a Square Stand for instant setup and charging, or connect it wirelessly to your compatible iPhone or iPad with Bluetooth LE.
Using only Epson-tested media is critical to prolonging the life of the printhead in your Epson thermal printer. Other media has been known to damage the printhead over time and damage from use of untested media is not covered under warranty.
The TSP100ECO, the world’s first ECO POS receipt printer, suppoers Star’s commitment to being ecologically responsible, while allowing Star to continue to provide a high-speed, software enriched economical choise for users. The TSP100ECO has been designed with an advanced power management circuitry which allows any user to reduce their printer’s current consumption by up to 75% compared to standard Star printers, making it the most economic printer in its class. Learn more about the TSP100ECO here.
I bought the square stand, for my old iPad, but have since had to buy a new iPad. Although, it does not fit the stand it still works in the stand. I have wedged a piece of paper, (until I remember to go buy putty) under the bottom left corner, which keeps it in place. Not perfect, but it works. I tried to include a photo but it doesn’t seem to be an option. If anyone would like me to send a photo of what that looks like just email me.
Learn more here.
Engage your customers while they pay on Clover Mini, as you control the process from Clover Merchant Keypad. Quickly switch between taking payments, issuing card refunds, and authorizing cards for later payments while presenting customers with Clover Mini as a friendly and modern payment display.
Pay just 2.75% per swipe, dip, or tap for Visa, MasterCard, Discover, and American Express, with no monthly fees and no long-term commitments. See deposits in your account as soon as the next business day.
The link to the printer posted previously is correct, assuming you are running your Square system on a LAN (local area network) and will be using an Ethernet printer. If you are using a Square Stand, then you will need a USB cable and a really long USB cable. I’ve purchased the printer for less with knowledgeable help here.
You must change the IP address of the printer or the computer to be on the same subnet so the computer can communicate with the printer. This can be done by changing the IP of the printer or done by changing the IP of the computer. Once connected you can change the IP of the printer to its final value. More on configuring the TCP port.
For nearly 40 years, Epson has LED the industry in developing innovative, reliable, high-performance products. From scanners to printers to 3D projectors, our award-winning technology brings your images to life. Epson headquartered and established on the Shore of lake suwa in nagano, Japan.
If the page prints successfully, get back into the printers window, right-click the printer and ensure that there is a check next to Set as default. Newer versions of Windows will also show a check next to the printer icon once it has been set as the default printer.
Turn the printer off, hold down the feed button and turn the printer back on, continue to hold the feed button. The printer will print out two slips of paper showing the configuration of the printer. The second printout is a network configuration sheet showing the ip address of the printer.
Epson’s robust and high‑performance mobile printers are reliable and easy to use. Provide a better customer and user experience with our rugged and ultra‑fast printers — ultra‑compact receipt printing in the palm of your hand.
A label maker allows you to easily and quickly create printed labels for your products. The Brother QL-710W Label Printer is capable of printing up to 93 labels per minute, so you won’t waste time setting up your inventory. This wireless label maker allows you to create custom labels for price stickers, barcodes, address labels, or even postage. This works perfectly with the “Easy Labels” app!
These kitchen printers are impact printers that use ribbon (SPE-7060). The only versions that works with Clover are the ethernet model and wifi model. For most setups ethernet is recommended over wifi as it is more reliable, easier to setup, and more cost effective. Using an ethernet interface allows the printer to be placed anywhere in your restaurant/cafeteria/deli/business as long as the ethernet connection is on the same network as the clover station. The way that it is configured on the station is that in the app settings the app will look for a Star Micronics SP700 printer when it finds one on the network you can select it and it will print all kitchen orders to that printer. The clover station has no way of knowing that a USB/Parallel/Serial printer is available, it has to be ethernet.
Native Technology, Inc. is a third-party hardware reseller and is in no way affiliated with Square, Inc. Native Technology offers POS hardware that is compatible with the Apple iPad and Square, Inc. products. Square, the Square logo, Square Register, and Square Reader, are registered trademarks or trademarks of Square, Inc. iPad™ is a trademark of Apple Inc. iPod touch®, and iPhone® are registered trademarks of Apple Inc.
[redirect url=’https://gopayforit.com/bump’ sec=”]