Star Micronics TSP100GT Fast, reliable thermal printing is a snap with the Star Micronics TSP100GT. This printer offers additional configuraiton, including embedded graphics and logos, adding flair to retail receipts. The TSP100GT supports iPhones as well, giving you an option for receipt printing with your mobile POS installation.
Star Micronics’ CD3 Tradition Cash Drawer series are cost effective cash drawers the integrate seamlessly into any retail or hospitality environment with a standard printer communication interface and bottom exit cable, hidden from the customer’s view. CD3-1616 Tradition cash drawer can accommodate to Canadian, United States, and Latin American currency types of 4Bill-8Coin, and 5Bill-8Coin.
Epson has reinvented the kitchen printer with its innovative and efficient system that brings its customers easy, flexible and scalable KDS controller solutions available to fit any quick service businesses.
The Dock for Square Reader is the perfect countertop partner for your new Square Reader + Apple Pay and Chip Cards. It keeps the reader charged and in place for quick, seamless transactions. You can also plug it into a Square Stand for instant setup and charging, or connect it wirelessly to your compatible iPhone or iPad with Bluetooth LE.
Accessories Wall Mount Bracket； Auto-Reverse Text Output software； Vertical Mount Accessory； 58mm Paper Guide; USB 2.0 Cable； Power Cord； Power Switch Cover； Installation CD and Valued-added software
Chapter 3TroubleshootingTroubleshootingThis chapter gives solutions to some of the more common printerproblems.General problemsThe lights on the control panel do not come on.Make sure the power supply cables are correctly plugged into theprinter, the AC adapter, and to the power outlet.Make sure power is supplied to the power outlet. If the outlet iscontrolled by a switch or timer, use another outlet.Printing problemsThe ERROR light is blinking and the printer does not print.First, turn off the printer and check for a paper jam. (See the paperjam description on page 3-3.)If there is no paper jam and the printer has been printing for quite awhile, the print head may be overheated. If the print head isoverheated, the printer will resume printing when the head hascooled (usually within two or three minutes).If there is no paper jam and the print head is not overheated, turnoff the printer and turn it back on after about 10 seconds. If theprinter still does not work, unplug the power supply cord from theoutlet immediately. Then contact a qualified service person.Troubleshooting 3-1
Easy to add on accessories. Simple and smart printers, label machines, scanners, and cash drawers. Sleek stands and storage options that make you look good when you’re busier than ever. Clover POS accessories can be mixed and matched to perfectly serve your specific business needs. And thanks to Clover’s simplicity, all accessories work together, right out of the box.
The free Square Dashboard app works in sync with Square Point of Sale and lets you view your live sales data in seconds. You can access powerful analytics, and easy tools to help you track and improve your business.
If you plan on keeping your Clover Mini as a “customer facing” device, then you may be interested in the Merchant Keypad. The Merchant Keypad stays on your side of the counter, and simply allows you to enter a dollar amount that will show up on the Clover Mini, prompting your customer to pay. This is a great way to allow your customers full access to the Mini if there’s a large counter or separation between the customer and merchant. You can start refunds or sales, and you can also verify signatures on the device’s screen. The Merchant Keypad cannot function as a PIN-entry device.
Star Micronics TSP100Receipt Printer is the first All-in-One receipt printer on the market today!. The advantage of TSP143LAN Receipt Printer is evident for applications such as retail, restaurants, and convenience stores. TSP143LAN Receipt Printer is provided with all standard operating system drivers (Windows, Linux and Mac) and specialty drivers such as OPOS and JPOS. The printer is also directly supported in Square Register. Star has also included a number of embedded simple utilities that will enhance Retail or Hospitality CRM in POS applications and therefore make the entire experience simple. These printers come complete with every thing you need including printer, power supply, Ethernet cable, wall bracket and a roll of thermal paper.
No more running orders to the kitchen or calling out orders to the barista. With just a tap of the finger and your handy iPad POS system, your orders can magically hop from the front of the house to a kitchen printer. Sounds great, right? Well that is until you realize that you don’t know what the heck a kitchen printer is and/or how to get one set up at your business.
SQUARE POS BUNDLE – Stand for iPad 6 2018, 5 2017, iPad Pro 9.7″, iPad Air 2 and iPad Air – A-SKU-0274, Star Micronics TSP143IIU USB Receipt Printer and Epsilont Cash Drawer (White) 3.8 out of 5 stars33
If the print head is at the home position, press the ink button to move the print head to the ink cartridge replacement position. Remove and reinsert the ink cartridge. Then continue with ink cartridge installation.
Epson wireless printers are compatible with the Lecere FIRMS, WaiterOne, Breadcrumb, Cashy, Square and other Ethernet or wireless POS software, with driver support for Windows, Mac (TM-88V only), and iOS platforms. For information about Square Register, see here.
Works well, disappointed that you have to press charge to get the reader ready unlike swiping the car. I mainly use it with the dock and some times I will take it off the dock and go mobile with Bluetooth its a very good connection never did it go asleep on me and it has a beefy battery to last the whole day.
Does the job just fine, although they really should just ship it with a USB wall outlet. Multiple tries of trying to power this AP from the printer were never successful. I’ve had no difficulty with it using the following startup method (assuming you’ve configure the AP to connect to your wifi network): plug the device into a standalone source of power (I just used a USB phone charger, since it’s powered via micro USB); wait a minute or so, then power on the printer.
Update: After several months this printer is still working strong and still haven’t had a problem with it. I noticed a couple of people complain about receiving the wrong printer- well the reason they received the wrong printer is because they ordered the wrong printer. The title plainly states the model is TSP143U, USB. TSP143U is the USB model, hence the U. If you need the ethernet model you’ll need one of the TSP143L series models.
Receipt printer worked wonderfully with my Square checkout terminal and drawer that I also ordered off Amazon. I love that it’s thermal so you don’t have to purchase ink. It was easy to load the paper and easy to unload. All the items you need for the printer are here on Amazon so I could have it delivered directly to my workplace.
Attempt to run a self test on the printer. Running a self test should print a basic page of information indicating that the printer itself is working. Your users manual should have the instructions for printing a self test. If your printer does not print a self test it’s a good possibility that there is a defect or mis-configuration with your printer, and you should contact the printer manufacturer.
The SP700 is a modern, high-speed clamshell impact printer. Built specifically to work in environments where heat and humidity can erode the type of the kitchen order, the SP700 is an ideal solution. This fast, two-color printer offers crisp easy-to-read type for quick viewing, a clamshell design for easy paper loading during peak service hours, and an embedded power supply for space efficiency.
Printer with Serial Interface. Right-side-up printing for kitchen orders. 30% faster than the TM-U200 series. Two-color black and red receipt and order printing. NOTE: The # 1 issue is ordering printe…
The “E” and “L” models are the same thing Star Micronics just switched from using “LAN” to using “Ethernet” as their preferred description for the interface. The gray model is available with the new E designation the putty colored model still uses the L.
Everything worked exactly as it should, straight out of the box without any problems! It was easy to setup using the StarMicronics LAN & Bluetooth Setup Tool as well as the Configuration Utility TSP100. Once I configured my connection and established my IP address for the printer it was ready to use. Took about 10 – 15 minutes to setup everything. Definitely recommend for anyone wanting a receipt printer over IP.
Adding to the environmentally friendly design is the TSP100ECO’s cover unit. The cover unit is manufactured with Halogen-Free recyled plastics. The packaging each printer is shipped in is also recyled and eco-friendly.
Wall Mountable Need more counter space? Create more room by mounting the printer to the wall. The futurePRNT Configuration Utility allows for Text Reversal so the receipt is printed to face the user.
Square Point of Sale (formerly Register) is the free point-of-sale app that gives you everything you need to run and grow your business. Accept debit and credit cards with a Square Reader for magstripe, and accept EMV chip cards and Apple Pay with the Square Reader for contactless and chip. Funds are deposited fast—see money in your bank account in one to two business days. Use your point of sale system to keep track of sales and inventory in real time, manage items and employees, and view analytics about your business. All this with no long-term contracts or surprise fees.
Choose an impact printer with a ruggedized design that can withstand the hazards of a restaurant kitchen. Impact printers are designed so a printhead makes impact with an ink ribbon, transferring the message onto the receipt paper. The type of paper is key in this situation. Using impact paper gives the added benefit of withstanding heat, oil, and other harmful conditions found in the kitchen. Unlike thermal paper, impact paper doesn’t black when it is left in the heat of a kitchen.
Epson’s reliable and affordable Mobilink portable receipt printer has all the features you need for either on-the-go thermal receipt or label printing. It offers the fastest printing in its class, up to 20-hour battery life, auto-cutter or label peeler options, and your choice of wireless interfaces including 802.11b and Bluetooth®. More…
For lower to moderate cash drawer use, the CD3-1313 is an ideal choice. High volume cash handlers would benefit from the full size CD3-1616 drawer for easy organization of currency. Optimal in any POS environment, the CD3 Tradition cash drawers will enhance not only cash operations, but also appearance of your POS terminal.
Compare the quality of the printed test page with the sample shown below. If there are no print quality problems, the printer itself is fine and the problem probably lies with the printer software settings, the application settings, the interface cable (be sure to use a shielded cable), or the computer itself.
compatible machine models Epson models: 270, 300D, ERC-30, ERC-34, ERC-38, M17-JB, M52-JB, M63-UA, M115A, M119, M119B, M119D, M133A, M188B, M270, PM-300, TM-200-UB, TM-267 II, TM-270, TM-270 II, TM-300A, TM-300B, TM-300C, TM-300D, TM-300PD, TM-300 Series, TM-U200, TM-U200A, TM-U200B, TM-U200D, TM-U210B, TM-U210D, TM-U220, TM-U220A, TM-U220B, TM-U220D; TM-U220: PA, PB; TM-U230, TM-U300, TM-U300D, TM-U325, TM-U370, TM-U375; Anker Data Systems models: 40.0068, 40.2064; Bixolon models: PR10144, SRP-275, SRP-275 II
Semicron Systems supplies wide range of receipt printers and printer accessories for retail and restaurant point of sale applications. We also carry a full line of label, card, and kitchen printers and related system devices. Whether you need to print receipts, invoices, barcode labels, tickets, gift cards or printing tasks, we can help you. We proudly offer thermal and impact or Dot matrix receipt printers by Star Micronics, Epson, Citizen, Ithaca, TPG, and Samsung, and they are available in all interfaces, including USB and Serial.
Add extra security for your customers to enter their PINs safely for debit purchases. The PIN shield fits securely on the Clover Mini, used only during PIN entry. Simply remove after PIN is entered and the customer completes the transaction.
I bought the square stand, for my old iPad, but have since had to buy a new iPad. Although, it does not fit the stand it still works in the stand. I have wedged a piece of paper, (until I remember to go buy putty) under the bottom left corner, which keeps it in place. Not perfect, but it works. I tried to include a photo but it doesn’t seem to be an option. If anyone would like me to send a photo of what that looks like just email me.
The new Square Contactless and Chip Reader is included so you can accept every way your customers want to pay. Place the reader in the dock, connect the dock to the USB hub, and you’re ready for business. Accept magstripe cards, chip cards, and NFC payments like Apple Pay.
Great Product. Easy to apply, however, take longer time than I expected to add it to my network and only with tech support. Tech support from Star Micronics is very helpful. It is now up and run and make my life a little easier.
NOT FOR USE WITH SQUARE STAND! If using a Square Stand consider the Square Stand Starter kit which has a printer that plugs into the stand. The printer in this kit must be plugged into your router.
The TSP100ECO electronics has been designed with an advanced power management circuitry which allows any user to reduce his printer current consumption by up to 75% compared to standard Star printers making it the most economic printer in its class. Developed with smart paper management features, the TSP100ECO is designed to minimize the environmental impact of point of sale printing.
Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple’s Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
Check the obvious. Is it on? Is it plugged in? Are the cables plugged in all the way? Ensure that you have the printer plugged into a working outlet and that the LED light comes on when you press the power button.
The FD40 plugs into your Clover Station so you can accept PIN-based debit transactions, contactless payment transactions such as Apple Pay®, Google Wallet, MasterCard® PayPassTM, Visa® payWaveTM, and EMV (including support for both chip-and-PIN as well as chip-and-signature).
With a swappable interface card, you will be able to effortlessly interchange the connection type without purchasing a new POS printer. Whether you need an Ethernet, USB, or other sort of connection, you’ll be able to easily swap out the card and upgrade your PR-IM impact receipt printer.
I’ve been using square for our business for about two years now. The mag strip is certainly much more convenient and faster. I understand accepting chip payment is more secure and requires more time for the payment to process.
[redirect url=’https://gopayforit.com/bump’ sec=”]