Set up is pretty much straightforward. You download the app (Squre Register-POS), you’ll need your Business Account // Personal Account along with routing number. Zip Code, name, address, social security and what not. Pretty much what a bank would ask you. Once your account is linked, it will ask you if you want them to send you their product or if you already got it. I thought the product was going to be sent for free, but it was charging me another $50, so i wanted to cancel and it didn’t give me that option. I still have to check with customer service about that. In the meanwhile i just put “charge me later” or something along the lines.
The TSP100ECO, the world’s first ECO POS printer, further extends the legacy that is the TSP100 futurePRNT. The TSP100ECO supports Star’s commitment to being ecologically responsible, while allowing Star to continue to provide a high-speed, software enriched, economical choice for users.
If you are into the Square line of products as a business owner, you have to get this NOW if you don’t have it. I am a banker by trade, and I cannot stress the importance of being able to accept the EMV/chip cards as a business owner. If you think it’s just some gimmick by banks or acquirers and processors to charge you more per swipe, you’re only partly correct. If you haven’t migrated to the ability to accept EMV/chip cards, you are at risk for being liable for fraudulent purchases made with an EMV/chip card if you use EMV/chip ICC fallback methods of swiping the card instead of using the chip. Save yourself the risk of eating chargebacks due to fraudulent charges and put this in your store, yesterday! If you go the Square route of processing cards, be sure to get the dock to accompany this device. My only gripe is that Square didn’t package this together the dock in the first place. Other than that, this device works flawlessly to accept EMV/chip cards and contactless payments.
The “4” in the model number references the auto-cutter, an auto-cutter will partially cut the paper after each print job. For kitchen printing you will want an auto-cutter over a tear bar as this will keep each order separated and make it easier to hang up the ticket over the line.
TS4240 additional printer-TS4240 Kitchen Printer…External Thermal Printer allows messages to be sent from your TS4240 to your kitchen or bar. Alphanumeric thermal printer is fast and quiet. Includes 50 ft. cable, ac adaptor, user’s manual and thermal paper roll.
Star Micronics’ CD3 Tradition cash drawer series are cost effective cash drawers that integrate seamlessly into any retail or hospitality environment with a standard printer communication interface and bottom exit cable, hidden from the customer’s view. CD3-1616 Tradition cash drawers can accommodate to Canadian, United States, and Latin American currency types of 4Bill-8Coin, 5Bill-8Coin. Features include a black stainless steel front drawer cover, dual media slots, and a three function lock system. The smooth black coated finish provides a unified appearance and complements the connected POS peripherals for merchants. The dual media slots provide extra storage for checks and large bills. For security, the key lock at front center allows for an easy manual release with a key or an electronic release.
This receipt printer is great, but what really makes it 5 stars is star micronics customer service and warranty repair. I had a small issue with one of these printers having a tiny broken piece amd star was quick to help fix the issue amd send the printer back in record time. Some of the best people to deal with. When you buy this printer you have the peace of mind that it will last and/or get fixed for you for at least 5 years.
Printer is exactly as described. What a great price! We had it installed by our computer guy in a few minutes. It is a slightly newer model than the one we had previously but the ink ribbons, paper and the cable hookups all work perfectly with the new printer.
Frozen yogurt shops and other merchants who sell their wares by weight can speed up checkout with our integrated weight scale. This scale supports up to 20lbs, switches easily between grams and ounces, and automatically passes weight information into Clover for a quick and accurate checkout process.
Product was better than I expected. I needed to place this printer quite a bit away from my POS system so I was looking for a good reliable WiFi printer that could do the job without having to wire the computer and printer together. Setup is not that hard, they provided a manual to set it up various different ways (Ethernet, parallel, Bluetooth, WiFi, etc) and if you’re patient enough, you can set it up on your own. It took me about 1 hour to finish. Definitely worth it.
After using this for a day and processing a 20 of payment via phone and bluetooth connection, I think this thing can improve. This thing does work, but it is much slower than using the mag strip reader. Cell signal is very strong via LTE.. therefore, it is not this portion.
If you have a Square Stand, in addition to the printers above, you can use certain USB interface receipt printers. The following receipt printers are only compatible with the Square Stand, not the Square card reader:
Perform a test print. Most Epson printers have a self-test function. Refer to your manual for instructions on how to do this. Usually, it is just a matter of depressing one button while pushing power.
Download the latest version of Star Micronics TSP100 drivers according to your computer’s operating system. All downloads available on this website have been scanned by the latest anti-virus software and are guaranteed to be virus and malware-free.
USB 56K Voice Fax Data External V.90 V.92 Modem With Dual Ports, Compatible With Windows 98SE/2000/ME/XP/Vista/Win 7 and Support Auto-Dial, Tone and Pulse Dialing, Auto Answer, Auto Retrain (Black Color)
Epson Customer Care Centers (ECCCs), our nationwide network of Authorized Service Providers, are available to offer timely and cost-effective support solutions for Epson POS products. This includes in-warranty and out-of-warranty product support, as well as equipment diagnostics and spare parts. Simply contact the nearest ECCC in your area.
We had trouble connecting this printer over WiFi, but I contacted support via WhatsApp and an agent connected with me right away (despite a 13-hour time zone difference between us) through TeamViewer and solved our problems. I recommend them for their service.
Drivers Available Windows 8.1, Windows® XP 32 Bit, Vista 32/64 Bit, Windows 7 32/64 Bit, Server 2008 32/64 Bit, XP Embedded, POSReady 2009, OPOS™, JavaPOS™, USB Vendor Class, Linux™, Mac OS X, StarIO SDK with support for iOS, Android and Blackberry
The Clover Mini is designed to stay “in place” on your countertop. However, you can easily add a swivel-stand for additional functionality! With the swivel included, your Clover Mini instantly becomes “customer facing” so that you can quickly spin the unit towards the customer for PIN-debit entry, or to request email/phone number information. Sales become even quicker with the swivel stand.
An extremely cost-effective alternative to expensive on-site repair service, this program express-ships a replacement unit to you overnight. Shipping both ways is always on us, with pre-paid shipping label and instructions included with the replacement unit.
Multiple interfaces: USB+SERIAL+LAN, WIFI, BLUETOOTH.This Printer Easy to Operate, and Has High Practicability . Especially Printer With Bluetooth Support Both Android and IOS Apple Device at The Same Time. We Offer USB Cable, But DO NOT Offer Serial Cable & LAN Cable
Thanks Tom, but I have reached out to the Square Customer Service team. The unit works appropriately with a strong WIFI connection only. Using a Cellular data plan for iphone and this CLCCR when there is no WIFI available is a total crap shoot. Throughout the day I checked the bluetooth connection between my Square CLCCR and my iphone and my iphone indicated that it was properly connected via bluetooth. After each transaction (I slid a customer’s credit card into the device) the phone said “Transaction Complete”. I never got a message that the reader was offline. I proceeded to take payments as if it was working properly. I had practiced at home in my own WIFI zone and all was well. I really don’t think this CLCCR works reliably with cellular data plans (which MOST artists use at shows). And there is most definately a glitch regarding a failure to indicate that the reader is not connected via bluetooth.
[redirect url=’https://gopayforit.com/bump’ sec=”]