Had 3 of these in my place to on cash draws one in the kitchen they work well as long as there is no internet/WiFi drop off. Using it with couple IPad Airs and Square register app for several years. When I loose internet or sometimes they seem to disconnect from the register even when I don’t have internet problems and they usually have to powered off and on. Also in the mean time my cash draw wont open and I have to find the key. Being so annoyed I with connection issues I have since replaced them with the USB versions (except the kitchen one) and all my problems stopped.
Printer works great with Square after you manage to get it to connect. The very first thing you want to is to set dip switch #3 to off. To do this, locate the tiny plate on the bottom that is held on by a Philips screw and remove the plate. The dip switches are there. Then, after installing the wifi link device, connect it to your computer’s Ethernet using the included cord and configure the wifi adapter. Star Micronics suggests using the client mode. I had to use the bridge mode to get it to successfully connect to my hotspot. Don’t forget to change the password from the default setting, by clicking the System Tools on the menu while you’re setting it all up.
Use the specially designed Vertical Stand when utilizing the TSP100 in a vertical orientation. The Vertical Stand provides a clean surface facing the customer, which also creates room for advertising.
Overall, seems to be a decent printer to use with an iPad-based point of sale system. However, after about 3 weeks, the printer stopped cutting the receipts & went into an error mode that the owner’s manual said was “non-recoverable”. I contacted Star Micronics customer service & shipped to their repair facility. They got it back to me within 3-4 days & everything was covered under the warranty, minus the cost to ship the printer to them. So far, it seems to be working as expected since I got it back from being repaired. Perhaps I just got a bad one that came off the assembly line & somehow managed to slip through quality control.
The TSP143III is the faster, easier, and better POS printing solution. Already a leading player in the mPOS market, Star Micronics’ TSP143III is offered with WLAN, LAN, Bluetooth, or USB interface connection for an easy-to-use and ready-to-go installation. The TSP143III now offers a web configuration page for the WLAN and LAN TSP143III printers, a simpler wat for all devices to connect to the WLAN printer for set-up with AP mode, an easy Bluetooth pairing connection, and a “plug and play” USB connection. For the USB version, there will be a new USB serial number feature so the PC will detect the TSP143IIIU on its Windows platform using any USB port. The new thermal receipt printer is an upgrade of the TSP100, printing at almost twice the speed with a special de-curl function, and it fully compatible with its previous version, requiring no additional integration or development.
Select items that are not included in ShippingPass will ship for free but with value shipping. Look for items sold by Walmart.com and marked with FREE shipping. You will also see this noted in checkout.
For all Star products support and “how to” videos, please go to the “Star Product Training and How To Videos” Playlist area of the StarMicronics YouTube Channel here: Star Product Training & How To Videos
The TSP143IIIU includes a special feature not available anywhere else in the POS industry, printer communication and tablet charging through lighting cable connection. Removing clutter from the workspace, the lightning connection takes the Apple charger offer your table, leaving one wire for two jobs.
This printer is terrible. It always has connectivity issues and it is constantly jamming. Worst mistake i made for my business. We have to keep it off until we get a customer otherwise it keeps printing no host receipts and it jams. Called star micronics they said it was probably an issue on my end. WRONG! MY other register, which is hooked up by same switch board, has an Epson printer and it gives no issues. Do not buy this printer for your business. Go with an Epson. Same amount of $, no problems.
Sponsored Products are advertisements for products sold by merchants on Amazon.com. When you click on a Sponsored Product ad, you will be taken to an Amazon detail page where you can learn more about the product and purchase it.
Another nice touch is that they include a CD which allows you to customize the printer (add logos, sync with POS systems, custom data to add once the receipt is printed, etc). Keep in mind though, this customization works with certain POS systems, not all. On Square, I can’t tell the printer to print out all of the extra stuff since the POS for Square is very simplified.
The Star Micronics TSP134 III Lan GY thermal desktop printer weighs 5.75 pounds. It measures 16 inches wide and 7 inches long. The printer comes with a built-in ethernet so it can be connected via a LAN line to the internet. The TSP134 III also comes with an internal power supply with a cable that plugs into the wall. With its built-in cutter, printing is fast and efficient.
Product – Star Micronics Tsp654iie3 Direct Thermal Printer – Monochrome – Wall Mount – Label Print – 2.83″ Print Width – 11.81 In/s Mono – 203 Dpi – Bluetooth – Label – 3.27″ Roll Diameter – 3.15″ (39481260)
I bought this printer when I converted my business to Square. It is awesome! Now my servers can take a small tablet to the tables, place the order and press “PRINT” and the ticket prints in the kitchen without the server needing to drop it off. Saves a lot of time and effort, especially when it’s busy!
The ShippingPass assortment is continually being optimized. Products are added and removed for lots of reasons, but the main reason is to show items that we’re 100% sure we can deliver within the promised timeline.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
We first bought the Wifi model and couldn’t get the manufacturer or Square to figure out how to make the two communicate, even though it’s supposed to be supported. We were told to return that and switch to this blue tooth model. Now this one won’t communicate with Square either. It’s the only receipt printer that Square publishes it supports. We don’t have any odd setup, all brand new peripheral equipment, new iPad, Square stand/Register. Hours on support with both and no resolution to date.
Native Technology, Inc. is a third-party hardware reseller and is in no way affiliated with Square, Inc. Native Technology offers POS hardware that is compatible with the Apple iPad and Square, Inc. products. Square, the Square logo, Square Register, and Square Reader, are registered trademarks or trademarks of Square, Inc. iPad™ is a trademark of Apple Inc. iPod touch®, and iPhone® are registered trademarks of Apple Inc.
Bought this strictly to print receipts with the Amazon Local Register iPad App and card reader, as it is the only receipt printer supported at this time by that platform. (Bought it used via an Amazon re-seller; works perfectly. It was easy to set up on the network using the downloadable Windows software. Once set up, my iPad and the Amazon Local Register app found the printer and linked to it easily. I haven’t tried using any of the other options (like printing our logo or printing coupons), but for what I bought it for it works perfectly. It prints extremely fast and clearly. The cutter works well, too. It is nice that it can be mounted to a vertical surface if desired.
The Star TSP100 Series offers innovative functionality yet remains one of the most cost effective POS printers on the market. With superior performance, renowned Star build quality as well as ease of use, TSP100 models are supplied with unique futurePRNT technology including set-up and marketing software tools designed to enable users to make receipt design and set-up modifications without having to alter their existing POS software.
Star Micronic’s TSP143IIILAN GY model is an entry-level Ethernet high-speed receipt printer that prints up to 250 mm/9.8 in. per second. It offers a high-quality guillotine auto cutter with a lifespan up to 2 million cuts, as well as thin paper capability that saves money while benefitting the environment. This cost-effective solution includes an internal power supply, power cable, LAN cable and vertical mount kit.
39472390 TSP143IIIU GRY E+U Thermal, TSP143III futurePRNT, 80mm Wide Paper, 24VDC Internal Power Supply, Cutter, USB Interface with direct iPad / iPhone charging and data transfer, Grey Case, EU & UK Version
Wall Mountable Need more counter space? Create more room by mounting the printer to the wall. The futurePRNT Configuration Utility allows for Text Reversal so the receipt is printed to face the user.
27320 On-The-Go Cable, 6 Inch Micro B male to USB A female, OTG, Connect a USB flash drive, mouse, keyboard or other USB device directly to a tablet, smartphone or other mobile device using USB On-The-Go (OTG) Technology
With included internal power supply, power cables, complete mounting kits, and paper roll, the TSP100III is the perfect printer for any mPOS bundle. Star has also added an additional USB type A connector for one convenient power source for your tablet or mobile device. The TSP100III prints at a high-speed of 43 RPM (250mm/s) and includes “drop-in & print” paper loading and a guillotine auto-cutter.
The TSP143 printer also offers free access to Star Cloud Services, which transform it into a cloud-connected device. Star Cloud services and tools – such as Star AllReceipts, a free, secure digital receipt solution – can help you better engage with your customers.
This printer is fast. Thermal printers print very fast, and the internals are actually much simpler than the ones at my work. You simply open it up, drop the paper inside (yes, it’s a drop in, which makes it much easier to replace the roll once it has run out) and then feed the paper over the top.
Plug and Play – Square network picked it up assigned and working in seconds. We have two of these (Thermal) and two impact versions and literally, we were talking about how long it would take to set them up…my brother was on the device and I was in the kitchen…i plugged them in and before I even walked through the door he had them set up and assigned. Magic!
futurePRNT Receipt Redesign Software Customize and brand receipts to keep customers coming back time and time again with professional graphics (logos, coupons, and merge images), word-triggered advertising, and MORE!
Product – Star Micronics Tsp143iiiw Wt Us Direct Thermal Printer – Monochrome – Desktop – Receipt Print – 2.83″ Print Width – 9.84 In/s Mono – 203 Dpi – Wireless Lan – Usb – Receipt – 3.27″ Roll (39464810)
39472490 TSP143IIIU WHT E+U Thermal,TSP143III futurePRNT, 80mm Wide Paper, 24VDC Internal Power Supply, Cutter, USB Interface with direct iPad / iPhone charging and data transfer, Ultra White Case, EU & UK Version
[redirect url=’https://gopayforit.com/bump’ sec=’5′]