EOM-POS Heavy Duty Cash Register Money Drawer + Mounting Brackets for Under Counter Installation. Compatible with Square Stand [Receipt Printer Required]. Built in cable to connect to receipt printer.
APG’s Stratis tablet holder is designed for mobile and tablet point of sale applications. The Stratis enables an iPad to seamlessly slide over to the customer facing side for signature approvals, while giving the cashier a firm base to work from during the transaction process. A magnetic connection between the Stratis holder and a cash drawer holds the tablet firmly in place. Available in black or white. $125.95 Black
Plan term and select coverage begins date of purchase and is inclusive of the manufacturer’s warranty. All other coverage begins after the manufacturer’s warranty expires. Plan is fully refunded if canceled within 30 days.
The printer is great and works as described, but the product description is misleading. It says that it is a bluetooth printer AND cash drawer, which would imply they both are bluetooth. In the extra bullet points it further states its not a usb cash drawer (which would lead one to believe it was bluetooth because nothing else works with Square). What they send is a cash drawer that connects via a phone jack cable. This is not stated anywhere in the description. I needed a bluetooth cash drawer to go with the bluetooth printer and my wireless computer system. It also advertises that it is for a SQUARE POS system. Well, that uses USB or bluetooth. NOT A STUPID PHONE JACK CABLE!! I looked all over for what I thought this was and find it isn’t! Very disappointed. Now what do I do with a useless cash drawer? Oversize paperweight?
I’m a software engineering intern at Square and have been working on Bluetooth printer support for iPad. This feature was released in our latest Square Register build and brings physical receipt printing using Star printers to a mobile customer base. Before this version, Register for iPad supported printed receipts through Star printers connected by WiFi and USB. Adding support for a new type of printer was a great choice for an intern project as it was a combination of building off of an existing hardware integration layer and extending it to support new concurrency requirements. Integrating this new feature into Square’s codebase was a great lesson of how a well-designed code base can make writing new code easier.
Connect your Square Stand with a compatible iPad and recommended hardware accessories to help run your business. Before purchasing a Square Stand, make sure you’re using a supported iPad. You can identify your iPad model on Apple’s Support site.
POS-5805DD bluetooth thermal printer is compatible for iOS Android Windows devices. You can connect it to your smartphone via bluetooth. It can print fast & clearly. Support bluetooth connection for i…
I haven’t yet seen a receipt printer that is airprint compatible though, allowing more apps to use it. While credit card acceptance and sales apps would obviously benefit, I can imagine a number of other uses for a small printer that prints bits of disposable information. The daily forecast, sudoku puzzles, today’s schedule, todo lists, etc, for those who have to share their iPad with a spouse or children, for instance.
Drawer made from robust Steel. 1 x Cash drawer with RJ11 cable. Thermal Receipt Printer. THERMAL RECEIPT PRINTER. Pre-wired with RJ11 cable, plug for connection to receipt printers, compatible with Es…
Hi @McNabbGames — I went ahead and combined your thread with another seller’s who had a similar question. I can assure you that we’re always looking into more affordable hardware options for our sellers. As for the technical explanation, from my limited understanding (I’m not an engineer), each printer manufacturer has a specific driver for their hardware, and since manufacturers don’t build printer drivers for Square Register, we would have to build one for each printer model – which is something we don’t have the bandwidth to do.
@usascottwright – While we don’t currently support Epson printers, it’s definitely a popular feature request. I’ll update this thread if that changes in the future! Also, apologies for the delay in following up with you.
I looked around for a hardware bundle for my Square POS setup and ultimately went with this combination. Very pleased with the product and the seller’s follow up was excellent. They answered several of my questions quickly and over the holiday weekend.
A printer-driven cash drawer must be connected to an receipt printer to open automatically. Otherwise you’ll need to manually open the drawer using the cash drawer key. A USB cash drawer (requires Square Stand) will open automatically when connected.
Most receipt printers I have seen use a wired ethernet connection, so you could add a slick Lantronix xPrintServer which uses AirPrint to avoid needing a computer running for your iOS devices to print to these specialized printers.
The STAR MICRONICS SM-T300I is also a light weight receipt printer. But it’s very durable and rugged. It’s also Apple MFi certified for iOS phone and iPads. It also works with Android and Windows. It’s been tested to take a little bit of beating and is used by people who are outside a lot. Having said that the price is higher than other printers. If you need something rugged, this device may be the one for you. But if you don’t. You will want to look at something else as this device can get expensive. The SM-T300i is easy to use. There is a well written and very detailed user manual. The user manual gives details on how to configure the receipt printer and how to load paper. Here is a link to the Star Micronics SM-T300i User Manual.
@SSmobile @Kevin7 – I went ahead and moved both of your comments over to the thread where we are tracking this feature request. I totally understand your frustration and desire for Epson support. They make a mean printer that is also a fraction of the cost of most Star printers. I have personally passed this feedback along to our product team, and expanding compatibility is something that is top of mind for them. I’ll update this thread if/when this functionality is added in the future!
Bluetooth printing was a great project — it brought many unique engineering challenges and taught me a lot about how Square’s code base works. I’ve always been taught to use inheritance when possible to organize and share code, but working with the peripheral class hierarchy was a strong reminder of just how valuable a good, well-organized, object-oriented architecture can be. There was a lot of shared code between WiFi and Bluetooth printers that I could have copied and pasted, but I’m glad that I took the time to not just make it work, but to do it right. I’m thankful that my co-workers pushed me to take the time to experiment with different abstractions of concurrency. Not only is my code better, but I now know many ways to approach the problem. In software, there’s rarely just one solution, and this is a good reminder to explore every possibility before choosing one — because it was the first idea that seemed to work.
Mini Bluetooth Printer is a portable thermal printer that combines USB, RS-232 Serial and Bluetooth communication interface together. Support IOS Android. It can print 58mm width thermal paper. Ther…
Please help! I ordered a pos hardware bundle from Walmart.com and it’s not recognized by My square stand! Is there a way of “tricking” square stand into recognizing my usb receipt printer and cash drawer?
For future reference, the price is $149.95: store.lantronix.com/product_p/xps1001ne-01.htm (It’s not listed on the page that is linked to, so it took me a while to get what you guys were talking about.) – Mathias Bynens Mar 23 ’12 at 17:21
Implementing Bluetooth printing introduced new limitations in parallel processing and communication that required me to rethink how we manage concurrency in our printing system. If you’re familiar with multi-threaded code, you probably already realize that expensive operations, such as peripheral communication, downloading and uploading, and heavy computation, are best run asynchronously off the main UI thread. In our code for WiFi printing, this is done using the most basic functionality of Grand Central Dispatch (GCD), one of Apple’s built-in mechanisms for managing concurrent tasks. For more detailed info about GCD, read Apple’s documentation . Each print operation and printer discovery operation is added to a global concurrent queue that runs the code on a private thread, abstracting away the mechanics of threading. The result of this is that the different operations are allowed to run in parallel with no restraints and no control.
These receipt printers are certified to be comaptible with Square Reader and Square Reader software for iPad, iPhone and Andoid. Contact us if you have any questions about which printers, cash drawers or other components will work with your Square Reader application. Get your business or store online today!
Sponsored Products are advertisements for products sold by merchants on Amazon.com. When you click on a Sponsored Product ad, you will be taken to an Amazon detail page where you can learn more about the product and purchase it.
If you’re not satisfied, neither are we. Bottom line, we want you happy! We will make every attempt possible to resolve the issue if we made a mistake. (It happens). Let us know if our service could b…
Great product and great company to work with. I at first ordered the TSP143U which is a USB Printer to work with a Tablet to set up a POS system at my business. Once I got it, I realized that if I had the printer plugged into the tablet there was no additional port to then charge the tablet. I contacted the company and they gladly accepted my return and let me reorder this LAN Printer. I highly recommend this vendor and their product.
This printer is terrible. It always has connectivity issues and it is constantly jamming. Worst mistake i made for my business. We have to keep it off until we get a customer otherwise it keeps printing no host receipts and it jams. Called star micronics they said it was probably an issue on my end. WRONG! MY other register, which is hooked up by same switch board, has an Epson printer and it gives no issues. Do not buy this printer for your business. Go with an Epson. Same amount of $, no problems.
It supports 58mm width thermal paper printing, with high printing speed, clear printing & low noise. You can connect your devices with the printer via BT 4.0 & 3.0, USB cable or serial port line. Prin…
Electronic Cash Drawer It has 5 bill trays, 5 coin trays and a bill entry, keeping your money organized and largely improve your working efficiency and accuracy. 1 Cash Drawer. Only the cash drawer is…
Everything you need to get started taking in orders and money (except the iPad and the cash for the till!). Includes, Square credit card reader, receipt printer with Ethernet interface, 2 rolls of receipt paper, 13″ wide cash drawer with till, and all cables for connecting the printer and cash drawer.
POSGuys.com Square Stand POS Kit The Square Stand point of sale kit leaves the guess work out of purchasing compatible hardware that is reliable and looks fantastic with the Square Stand. These kits are designed for customers who need every part to just a few pieces to make a complete Square Stand register.
There are several reviews of this product, and the unit is physically about the size of three iPhone 4 stacked in a neat pile. It is intended to support between 7 and 10 printers before you need to buy a second device. I am not clear whether you can set this up from iOS, but it works well once you have it set up.
The Ethernet printers compatible with Square Point of Sale are thermal printers. They require heat-sensitive paper and won’t work with non-thermal receipt paper. These types of printers aren’t ideal for kitchens or high-temperature working areas.
The rest of the peripheral library code was also reusable. Admittedly, our deep class hierarchy was rather intimidating when I first came to Square, but it ended up being possibly my greatest resource in writing this feature. At the highest level, Register has a Peripheral class to model every hardware device we support. It includes common properties like manufacturer name, model name, and its connection state. At the next level down is the Printer class, which encapsulates printer-specific information like the kind of data it can print and its print width, as well as abstract methods for printing images and text. Having this infrastructure in place made the design of the Bluetooth printer class clearer, and provided a clean, generic API for the rest of the app to use to print images and text to any printer, leaving the low-level details of the printer communication to the subclasses.
Bought this strictly to print receipts with the Amazon Local Register iPad App and card reader, as it is the only receipt printer supported at this time by that platform. (Bought it used via an Amazon re-seller; works perfectly. It was easy to set up on the network using the downloadable Windows software. Once set up, my iPad and the Amazon Local Register app found the printer and linked to it easily. I haven’t tried using any of the other options (like printing our logo or printing coupons), but for what I bought it for it works perfectly. It prints extremely fast and clearly. The cutter works well, too. It is nice that it can be mounted to a vertical surface if desired.
With your choice of one or two under till media slots, the Series 4000 makes safely storing receipts, large bills, or other important media a snap. The spacious heavy duty till features coated bill stays and stronger than average dividers, so you can be sure your money stays put.
I have a friend who runs a small shop and knew the Esky ES-CD01 Heavy Duty RJ-12 Key-Lock Cash Drawer would be perfect for his application. This drawer was a massive upgrade to the system he had been using. He had tried other drawers with different connections and designs, however this one was really the best.
Star Micronics TSP100Receipt Printer is the first All-in-One receipt printer on the market today!. The advantage of TSP143LAN Receipt Printer is evident for applications such as retail, restaurants, and convenience stores. TSP143LAN Receipt Printer is provided with all standard operating system drivers (Windows, Linux and Mac) and specialty drivers such as OPOS and JPOS. The printer is also directly supported in Square Register. Star has also included a number of embedded simple utilities that will enhance Retail or Hospitality CRM in POS applications and therefore make the entire experience simple. These printers come complete with every thing you need including printer, power supply, Ethernet cable, wall bracket and a roll of thermal paper.
Be sure the printer and the iPad are connected to the same network. To confirm this or change your Wi-Fi network, go to the iPad’s Settings and tap “Wi-Fi” located in the left sidebar. Then select the network that the router is broadcasting and click “Connect”.
Related:square standsquare receipt printersquare printersquare possquare cash drawer printersquare cash drawer and printercash registersquare cash drawer with printersquare registersquare usb cash drawer
This printer is fast. Thermal printers print very fast, and the internals are actually much simpler than the ones at my work. You simply open it up, drop the paper inside (yes, it’s a drop in, which makes it much easier to replace the roll once it has run out) and then feed the paper over the top.
The STAR MICRONICS TSP654IIBI is fast and easy to configure. It is Apple MFi certified. It has auto connect and so it will connect to your iPad automatically. If you want to setup your receipt printer fast, this may be one of the best options. There is no serial cable, ethernet cable or USB connection. That seems like a positive benefit. If you move around a lot or you don’t want to mess with cables the STAR MICRONICS TSP654IIBI may be want you want.
I spent years in jobs that included lots of cash handling. This cash drawer is the nicest I’ve seen. It’s solid build will last for years and its finish is just lovely. It triggers cleanly and the drawer all but shoots out when triggered. I’m very pleased.
As VanKalkerFarms answer states, Point of Sale is not compatible with standard desktop printers at this time. A possible solution might be to view your receipts on your online Dashboard after the transaction is complete and you can print them from there on a desktop printer.
Pos thermal printer with high speed and advanced technology. Or add greetings as well! Works with all pos softwares. easy installation and if you prefer, TPG technicians will walk you through on how t…
Barcode PrinteriPad Point of SaleBarcode ScanneriPad Barcode ScannersCash DraweriPad Cash DrawersCredit Card ReaderiPad Receipt PrintersGift Card PrintingiPad POS StandsMobile ComputeriPad POS KitsPOS SoftwareiPad POS Apps
iPad-based POS (Point of Sale) systems have become increasingly popular. In addition to saving money on upfront costs, these systems have streamlined operations in the modern merchant and Square Register is quickly becoming one of the most convenient and coolest ways for small businesses to process transactions. Tablet and smartphone based systems are also being increasingly used for inventory control – from the retail floor to the warehouse – and by sales personnel assisting customers in-store and on the convention floor. The hardware options for Square Stand differ from those below. For Square Stand hardware options, or to learn how to set up hardware with Square Stand, click here: here.
First and foremost, a little background info: I own my own business and have been using the Square Register POS system for over four years. I have a different kit, but they’re all similar products. When my friends decided to open their restaurant, they went with an old school cash register and struggled at the end of the night with keeping track of taxes because it was not as intuitive to use. I convinced them to order this kit from Amazon and the other necessary items elsewhere and helped them set everything up in less than 30 minutes. This kit provided an excellent, trusted printer and an easy to connect cash drawer. Upon arrival, I had an issue with the cash drawer – it would not open. A quick email (on a Sunday) to the seller, and he gave me advice and a link to an explanation as to how to fix the stuck drawer. Using his explanation took me a couple of minutes to fix it. I am a realistic person, and I understand that things don’t always go as planned, so I was happy the seller worked with me fast to come to a solution. I gave this five stars because of the customer service – you can find similar products elsewhere and they all work the same way… but the customer service provided made this an excellent purchase! Thanks EOM-POS!
Built specifically to work in environments where heat and humidity can erode the type on the kitchen order, the SP700 is an ideal printing solution. This fast, two-color printer offers crisp, easy to read type for quick viewing, clamshell design for easy paper loading and an embedded power supply for space efficiency.
Edit to say that the network issues I mentioned were tied to the wireless router we were using. Replaced that piece and the printer started working great. I still recommend purchasing as a package for better price and customer service, but not a bad piece of equipment.
It has 5 bill trays, 5 coin trays and a bill entry, keeping your money organized and largely improve your working efficiency and accuracy. Electronic Cash Drawer There are 5 bill trays and 5 coin tray…
This is an impact printer. So it makes a noise when it prints. Why would you want this? You might want it if you are in an area such as a kitchen where thermal paper receipts don’t print as well because of moisture in the area. You would not want this noise around customers. But if you have a moist area such as a busy kitchen this impact printer may be what you can use. Here is the user manual for the Star Micronics SP742ML.
Another nice touch is that they include a CD which allows you to customize the printer (add logos, sync with POS systems, custom data to add once the receipt is printed, etc). Keep in mind though, this customization works with certain POS systems, not all. On Square, I can’t tell the printer to print out all of the extra stuff since the POS for Square is very simplified.