A cash drawer must be connected to a receipt printer to open automatically. Otherwise, you’ll need to manually open the drawer using the cash drawer key. To link your cash drawer to the Square app on your iPad, you can connect it to a supported receipt printer that has a peripheral drive connector using an interface cable. Most receipt printers, except mobile bluetooth printers, generally have a peripheral drive connector.
Bottom Line: The HP OfficeJet 200 Mobile Printer is a speedy portable inkjet that offers high-quality output and a wide range of connection choices to businesspeople who need to print while on the road.
Embedded Web Server: password-protection, secure browsing via SSL/TLS; Network: enable/disable network ports and features, SNMPv1 & SNMPv2 community password change, SNMPv3; IP/MAC Address Filtering (IPv4/IPv6/MAC); IPSec; 802.1x
100% Compatible with Square POS. We are using square stand with ipad and we simply attached the printers (we have 2 registers) and they showed up right away. No programming or drivers are required. Nice little thermal printer for the price and it’s a name brand, so I hope will last a while.
If you plan to get a printer with your system, then stick with lower cost serial (not usb) based cash drawer and tie it into the printer instead, which also frees up one of the precious and limited usb ports on a square stand. This is important when you need a chip/nfc reader, printer, drawer, and scanner.
Printer works great with Square after you manage to get it to connect. The very first thing you want to is to set dip switch #3 to off. To do this, locate the tiny plate on the bottom that is held on by a Philips screw and remove the plate. The dip switches are there. Then, after installing the wifi link device, connect it to your computer’s Ethernet using the included cord and configure the wifi adapter. Star Micronics suggests using the client mode. I had to use the bridge mode to get it to successfully connect to my hotspot. Don’t forget to change the password from the default setting, by clicking the System Tools on the menu while you’re setting it all up.
The new TSP143III thermal receipt printers have a lot to offer mPOS businesses and point of sales systems. The new model prints faster at 43 receipts per minute and is by far easier to setup. At the time of writing, the TSP100III receipt printer is probably the best POS printing solution in the market. And Star can backup that claim with its easy to use and ready to go installation.
Native Technology, Inc. is a third-party hardware reseller and is in no way affiliated with Square, Inc. Native Technology offers POS hardware that is compatible with the Apple iPad and Square, Inc. products. Square, the Square logo, Square Register, and Square Reader, are registered trademarks or trademarks of Square, Inc. iPad™ is a trademark of Apple Inc. iPod touch®, and iPhone® are registered trademarks of Apple Inc.
This thing works awesome, and there are tons of other reviews, so read those for more info. Only problem we have had is the stand has a hard time connecting to chip reader occasionally. When you open the program for the first time, there is like a 10% chance it won’t connect to chip reader. You have to quit app and restart. Gets old.
GPRS SMS Printer is usually used for restaurant online food delivery, online shopping, etc. As it is compatible with GPRS , SMS , USSD & STK , it is also workable for mobile top up, mobile payment, etc.
Finally, two other issues fall loosely under the heading of quality: ruggedness and lifetime. Don’t expect much in the way of ruggedness for fine art papers for exhibition, but you do need it for stacks of 4-by-6s that you might hand out for people to look through. Photos from most printers today are reasonably waterproof and scratch resistant, but some fare better than others.
The usual rule for printers is to find out the printer’s monthly duty cycle (the maximum you can print per month) and its recommended duty cycle, and make sure the recommended duty cycle is more than you plan to print. Unfortunately, this is almost impossible with most dedicated and near-dedicated photo printers.
Arts & CraftsAudio, TV & Streaming MediaBags, Backpacks & BriefcasesBooks & MagazinesCell Phones & AccessoriesCleaning SuppliesCoffee Lovers CenterCoffee, Water, SnacksComputer Accessories & PeripheralsTeacher & EducationFitnessFurnitureGaming
Other Thoughts: One improvement to make it even more portable, would be to have a completely wireless model which would recharge, rather than needing to be plugged into mains. When selling at outdoor events, I do not always have access to a power outlet. My Point-of-sale equipment has battery life enough to get me through a whole day without a recharge, so it would be nice if my receipt printer could do the same.
Mini Bluetooth Printer is a small, lightweight mobile receipt printer that brings user convenience and functionality to any mobile receipt printing application, such as: mobile POS / retail; hospitality ; parking citations ; deliveries ; onboard transportation ; field reparis / installation ; warehouse / logistics ; utility billing / meter reading.
Printers didn’t function properly. I returned them within the 30 day window and I was charged a 50% restocking fee for the item not being new anymore. I’m not sure how I could tell if the item was functioning properly while it sits in the box, but it’s been a terrible experience for me. Would not recommend.
Packaged with everything you need including a complete mounting kit, paper roll, internal power supply, power cables, and software. The TSP100 series has been Star Micronics most popular thermal receipt printer for years. The ease of use, speed and mPOS features of the TSP100III series, backed by a 3-year warranty, will likely place it in the 3 most popular receipt printers for years to come.
This was good – arrived in fine condition – however the description said everything was included in the box, including interface cable (which can only mean the usb cable since that’s the only other cable beyond the power cable necessary – and that is also mentioned in the description)… BUT there was definitely no USB cable included in the package. So, will need to purchase one for this to work. Which I would have done when I placed this order, but was under the impression everything was included.
Receipt printer information by POSGuys.com. We do a receipt printer speed comparison and demonstrate the differences between impact receipt printers and thermal receipt printers. Our buyers guide http://www.posguys.com/buyersguide/Bu… gives more information.
Square for Android is officially compatible with USB interface barcode scanners, USB or Ethernet interface receipt printers, and USB or printer driven cash drawers (that are compatible with your receipt printer). Below is the list of recommended hardware for Square for Android. Links will direct you to official part number pages.For more information on compatibility, please give us a call!
The Star Micronics TSP143IIILAN works with Square Payments. Star Micronics is a well known manufacturer of thermal receipt printers. They make many different models. You connect to a Square iPad stand with a USB cable. This receipt printer uses 80 mm width or 3 1/8 inch width thermal paper for the receipts. There is a roll of paper that ships with the receipt printer. An auto cutter mechanism cuts the thermal receipt paper for you when you make a sale.
Star’s best selling printer worldwide, the TSP100, is the first software-driven POS receipt printer to provide an immediate plug & play application. Setting new standards for POS printing technology, the revolutionary TSP100 allows retailers to tailor and continuously modify all aspects of their receipt output to their individual needs.
Memory Switch Setting Table Printer Mode Setting Display Bluetooth(iOS) * Bluetooth(iAP) Communication Port Bluetooth Bluetooth Mode RS-232C UART Mode 9600 bps 9600 BPS Baud Rate 38400 bps 38400 BPS 115200 bps * 115200 BPS No Parity * NO PARITY Parity Bit Odd Parity ODD PARITY Even Parity…
Great product and great company to work with. I at first ordered the TSP143U which is a USB Printer to work with a Tablet to set up a POS system at my business. Once I got it, I realized that if I had the printer plugged into the tablet there was no additional port to then charge the tablet. I contacted the company and they gladly accepted my return and let me reorder this LAN Printer. I highly recommend this vendor and their product.
So let me get this straight; after I email/text the customer the receipt I should then email it to myself and then print it from my email (after formatting if I like)? Can’t I just print from the app without buying a special credit card printer? Guess not…
The STAR MICRONICS TSP654IIBI is fast and easy to configure. It is Apple MFi certified. It has auto connect and so it will connect to your iPad automatically. If you want to setup your receipt printer fast, this may be one of the best options. There is no serial cable, ethernet cable or USB connection. That seems like a positive benefit. If you move around a lot or you don’t want to mess with cables the STAR MICRONICS TSP654IIBI may be want you want.
The Star TSP100 Series offers innovative functionality yet remaining one of the most cost effective POS printers on the market. With superior performance, renowned Star build quality as well as ease of use, TSP100 models are supplied with unique futurePRNT technology including set-up and marketing software tools designed to enable users to make receipt design and set-up modifications without having to alter their existing POS software.
I have a Star Micronics TSP100 Trueprint USB printer and the Squarestand. When I plug the printer into the USB block connected to the square stand, it is not recognized by the square register software.
We bought this thermal printer for work. It works well as described, but there are some programs that don’t use the printer, and setting up the printer is less than intuitive/easy for the average user. I had to go into advanced settings and follow advice on forums to get it to function the right way.
This printer is fast. Thermal printers print very fast, and the internals are actually much simpler than the ones at my work. You simply open it up, drop the paper inside (yes, it’s a drop in, which makes it much easier to replace the roll once it has run out) and then feed the paper over the top.
Using it with a Square Stand and a portable tablet, set up was easy, works perfectly. We are using it with a TP-Link Powerline Adapter AV200 model so we can put it anywhere there is power in our facility. The Square software saw it immediately and printing works great. If both stations try to print at the same time, one is buffered in the printer until the first one has finished.
Whether if you are ready or not, the era of mPOS is here to stay. Maximize your retail space and engage your customers with mobile technology. We have more innovative technologies on the way so stay tuned to Star and keep pace with the new era of mobile point of sale.
EPSON and Mobilink are registered trademarks; EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. All other product brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights to these marks. Copyright 2016 Epson America, Inc.
If you don’t want your paired printer to connect automatically every time you switch it on, then you need to disable auto-connect. One reason for disabling auto-connect is if you use multiple iPads with a single printer.
@SSmobile @Kevin7 – I went ahead and moved both of your comments over to the thread where we are tracking this feature request. I totally understand your frustration and desire for Epson support. They make a mean printer that is also a fraction of the cost of most Star printers. I have personally passed this feedback along to our product team, and expanding compatibility is something that is top of mind for them. I’ll update this thread if/when this functionality is added in the future!
Use Shopify’s dashboard to track customers and sales made both online and in your retail location using Shopify POS. Detailed reporting and analytics help you make the best choices to grow your business.
Note: if you use the Star SM-L200 printer in combination with an iPhone 4S or later model (or an iPad 3rd Generation, iPad mini or newer model), you can skip steps 1 – 2 above. The printer will automatically connect via Bluetooth
Near-dedicated photo printers don’t offer the same kinds of extras as dedicated models. By definition, however, they’re also capable of printing standard business documents, although it’s generally a waste of their talents—like using a brand-new Porsche as a town car. Some are harder to use for standard office printing than others, mainly because you have to swap out ink cartridges when you switch between glossy and plain paper. If you must use a near-dedicated photo printer for office printing as well as photos, even occasionally, be sure to pick one that lets you easily switch between photo paper and plain paper.
Any near-dedicated photo printer should offer output quality suitable for a professional photographer’s exhibition prints, but you should obviously check to make sure. Keep in mind too that different people have different tastes, so choosing between two or more printers with superb, but slightly different, output may depend entirely on which one you like better.
The printer is compact, prints clearly, and has absolutely no issue when printing a receipt for my Square sales. The fact that it is blue tooth meant I could put it anywhere in my home office that was convenient and not tied down by the length of a USB cord otherwise. I have it linked up to an old iPhone 4s phone and run credit cards using Square and print receipts easily. I’m so pleased that I paid some more money and got the blue tooth version.
Features:It can be used for all kinds of commercial in retail POS systems, Restaurant system, Industrial control systems in areas such as:Light weight and portableBeautiful shapeLow cost and High-qual…
[redirect url=’https://gopayforit.com/bump’ sec=’0′]